FREE CANNY ASSESMENT

0800 – 327 – 437 

Shower Resealing

Our shower resealing/re-grouting service will stop leaking showers and shower leaks at the source. Through our multistep process, we can not only stop your shower from leaking, but we can also make your surfaces look immaculate at the same time.

1). Product Preparation

We remove your existing floor tile grout & prepare all wall tile and floor tile junctions along with any vertical internal junctions including vertical and horizontal hob and wall tile junctions using specially engineered diamond burs. This process ensures a clean product bond to the tile, instead of just surface adhesion.

2). Epoxy Application

Epoxy Grout will be applied to the prepared tile joints and internal junctions. The epoxy grout has been specifically designed for wet area sealing and has the strength to withstand normal building movement. It will not crack, deteriorate or let water penetrate through the junctions. It does not dissolve and is not weakened by strong chemical cleaning agents.

3). Seal Internal of Waste

Generally the grate is not mechanically connected to the waste riser and the sand & cement screed is evident once the grate is removed. This also allows capillary action of waste water through the screed underneath the tiles. An epoxy sleeve with be applied to tis screed preventing further capillary action.

4). Wall Grout

The full shower regrout service involves the removal of your existing wall grout from top of shower screen down to the floor tiles. Removal of the existing wall grout using engineered diamond tool to a depth of half the tile joint width ensures superior bonding and mould protection over the more widely used refacing method. The shower walls age regrouted with a smooth, flexible, mould-resistant waterproof polymer grout.

5). Reseal Shower Screen Base

The shower floor area is regrouted up to the internal of the shower screen. Your existing sealant to the bottom of the screen where it sits on top of the floor tiles will be remover prior to epoxy regrouting and new mould inhabitant sealant applied once regrouted.

6). Vertical Internal Corner

The vertical internal wall & wall comer will be prepared and new polymer sealant applied.

choose your image

Get a free, no obligation Canny Assessment

Canny are Wellingtons leading experts in professional surface cleaning and restoration. We restore surfaces that other cleaners can’t. 100% Money back guarantee.

Get your free Canny Assessment

Frequently Asked Questions

If you have questions outside of these FAQ’s please call or email us.

What is the process of cleaning shower glass?

The process differs slightly depending on the age, size, type of build up and the severity of the water staining. The general process entails deep cleaning all the glass and chrome surfaces inside the shower cubicle using specialist cleaning products that have been proven to work. We then use an electric polisher to deep clean the glass even further to remove any stubborn staining and build up deep from within the pores of the glass. Once we have the glass back to an as new condition we apply a protective coating to your glass for easier ongoing maintenance and to prevent future staining.

How long does the complete process take?

The time taken depends on the intensity of the damage. Roughly even hard to remove stains in a regular size shower can be restored in between 2 to 4 hours. If you don’t apply a protective coating the shower can be used immediately. If a coating is applied the shower must be left for a minimum of 3 hours before using.

Does Canny provide any warranty for our restoration service?

Yes, we do? The length of warranty depends on the age and condition of the glass/surface at time of restoration and the products used.

What is the recommended after care post shower glass restoration?

Aftercare is an easy process. We simply ask that you wipe down or squeedgee off the glass after use and clean the glass every 2 weeks with the aftercare products provided. This will prevent any extra build up getting in to the glass and minimise time on any other cleaning.

What is the process of cleaning dirty tiles?

Tiles come in different variety and texture such as slate tiles, marble tiles, granite tiles, vinyl etc. Thereby, the process of cleaning each of them and the products to be used are different. Consider talking to an expert, at Canny we can take a quick look and suggest what would be the right treatment you should go after.

What if I am not satisfied with the restoration?

We are confident you will be satisfied with the transformation as this is what we specialise in. If for any reason you are not satisfied we will return to complete the job to your satisfaction.

What is the process of silicone removal & replacement? Can we do it ourself?

It depends on the depth of the problem. Yes, you can do it yourself if you have the right equipment, products and if you understand the process. Only if it is done the right way it is worth it or else you might end up with even worse looking floors and water ingress issues. Hiring a professional is certainly a good option to consider. Canny is Wellington’s premier silicone experts with years of professional experience. Our staff are fully trained and can make your silicone replacement simple. We are excited to help revitalise your bathroom, kitchen or tile floors.

Grout discolouration, dirt build up? Why does my tile grout get dirty?

Tiles and Grout when new can be the difference between the WOW factor or not. They don’t stay looking like new for long though and soon create micro hiding places for dirt, oils, and bacteria. The condition worsens in a short amount of time and creates an unacceptable floor or wall that cannot be cleaned by usual methods. Due to the porous structure of grout, it easily absorbs stains, mold, and dirt – particularly if it didn’t have a commercial grade grout sealer protecting it. Acids can also cause discoloration which over time makes your tile grout dull – and sometimes this is irreversible.

What modes of payment are available at Canny?

We accept direct credit, credit card and debit card payments. As well as direct deposit.

How long will the restoration last?

Glass: This is very much determined but how well you follow the aftercare instructions. If the aftercare instructions are followed your shower glass will look pristine for years.Silicone: This is very dependent on how it is maintained and the levels of humidity. On average silicone should last between 2 to 5 years in most wet areas.Grout Removal/Protection: This is very dependent on how it is maintained and the products used. On average grout sealing should last between 2 to 10 years in most areas.Tiles and Stone: This is very dependent on how it is maintained and the products used. On average tile and natural stone sealing should last between 2 to 10 years in most areas.

Areas covered

Wellington Central Suburbs

Upper Hutt

Lower Hutt

Porirua

Kapiti Coast

Services

Bathroom Makeover Packages

Glass Stain Removal + Protection

Grout Removal + Replacement

Shower Resealing

Silicone Removal & Replacement

Tile & Grout Cleaning

Tile & Grout Sealing

Natural Stone Rejuvenation

Contact

info@canny.co.nz

0800 327 437

Other Info

Aftercare

Warranties

Privacy Policy